SYD-5 type furnace soot blower

Classification:

SYD-5 type furnace soot blower is mainly used to remove the ash and slagging on the boiler water wall. The SYD-5 type furnace soot blower uses a single nozzle to move forward in place and then rotate to blow soot at a fixed point. According to the nature of ash (or slagging) and the requirements of sootblowing at different parts of the boiler, the sweep arc, the number of sweep rings and the sootblowing pressure of the sootblower can be adjusted to achieve the most ideal sootblowing effect.

Service Hotline:

86-27-81887676

Inquiry

Keyword:

Boiler Efficiency & Cleanliness

the

soot

SYD-5 type furnace soot blower is mainly used to remove the ash and slagging on the boiler water wall.

The SYD-5 type furnace soot blower uses a single nozzle to move forward in place and then rotate to blow soot at a fixed point.

According to the nature of ash (or slagging) and the requirements of soot blowing in different parts of the boiler, the purging arc, number of purging circles and soot blowing pressure of the soot blower can be adjusted to achieve the most ideal soot blowing effect.

Main technical parameters

Sootblower stroke	267mm
Soot blower travel speed	290mm／min
Soot Blower Speed	2.3r.p.m
Each working time	2.76min (1 round of purging)
	3.62min (2 cycles of purging)
	4.49min (3 cycles of purging)
Soot blowing medium	Steam or compressed air
Soot blowing pressure	～1.5MPa
Medium consumption	~ 30kg (purge l turn)
	~ 60kg (purge 2 turns)
	~ 90kg (3 cycles of purging)
Number of nozzles	1 only
Nozzle caliber	Φ25.4mm
Nozzle caster angle	3°
Effective sootblowing radius	1.5～2m
Motor model and related parameters	YSR-6324 B5 0.18kw 　～1370r.p.m． 380V.3P.50Hz
Weight	～110kg

Note: The speed, working time and medium consumption of the soot blower in the table are directly related to the parameters of the motor and power supply,